Tag Docket

Features

Whether the yard sign scans is decided before the print run.

The QR picture is the easy half. The numbers are the point: how big it must be printed for the distance it is read from, how much damage it can take, and a short code you can repoint after ten thousand of them are in mailboxes.

Print advice

The size worked out for where it is printed

Say what the code is printed on and Tag Docket reports the grid size, the smallest width that scans from that distance, and the size of each square in millimetres, with a warning when they fall below what print holds.

  • Error correction is set by surface, so nobody has to know what Q means
  • The quiet zone is kept. A designer who crops to the black edge ships a code that fails in the field
  • Every code is drawn from the frozen link, and a link with an unfilled ad macro is refused a code: nothing fills in an ad ID when someone scans a postcard
QR code sizes, reading distance and error correction by where it is printed
Printed on Read from Error correction Print at least Full tagged link Short link
Postcard or mailer 1 ft (0.3 m) M · ~15% 1.2 in (3 cm) 49×49 · 0.61 mm 25×25 · 1.2 mm
Flyer, door hanger or print ad 1.3 ft (0.4 m) M · ~15% 1.6 in (4 cm) 49×49 · 0.82 mm 25×25 · 1.6 mm
Poster, window or booth sign 4.9 ft (1.5 m) Q · ~25% 5.9 in (15 cm) 57×57 · 2.63 mm 29×29 · 5.17 mm
Yard sign or site board 9.8 ft (3 m) H · ~30% 11.8 in (30 cm) 65×65 · 4.62 mm 29×29 · 10.34 mm
Vehicle wrap 16.4 ft (5 m) Q · ~25% 19.7 in (50 cm) 57×57 · 8.77 mm 29×29 · 17.24 mm

Worked out by the product for a sample link of 144 characters and a short link of 21. The grid is how many squares across; the larger each square, the further away a phone can read it.

  • L

    Survives ~7% damage

    For screens and clean indoor print.

  • M

    Survives ~15% damage

    For brochures, flyers, direct mail.

  • Q

    Survives ~25% damage

    For busy backgrounds, vehicle wraps.

  • H

    Survives ~30% damage

    For outdoors: yard signs, site boards.

Short codes

Repoint it after the print run

A printed piece gets a short code on tgd.li, which resolves to the fully tagged link. When the spring offer page becomes the summer one, retarget the code: the destination moves, the tagging stays, and GA4 keeps seeing the same campaign.

  • Codes leave out 0, O, 1, I, L and U, so nobody misreads one off a sign
  • Redirects are 302, never 301, so people who scanned before the change still follow it
  • A code is disabled, never deleted. A retired code shows a friendly page that says the phone is fine
  • Every retarget is in the link’s audit trail

Placements

What each printed piece cost, and what it brought in

Log each mail drop, sign batch, billboard or radio flight as a placement: its dates, quantity, cost, area, vendor and the short code printed on it. Scans are read live from the code, never copied, so cost per scan and cost per lead are always current.

Kinds of placement

  • Postcard
  • Flyer
  • Brochure
  • Door hanger
  • Yard sign
  • Site board
  • Vehicle wrap
  • Booth sign
  • Billboard
  • Print ad
  • Radio
  • TV
  • Event
  • Other

Nothing to scan?

Radio and TV carry a promo code, a tracking number and hand-counted leads instead.

Filter and export

By kind and date, to CSV. Placements go with a client’s export and move with them on a transfer.

In GA4

Give offline traffic somewhere to land

GA4 has no default channel for print. Links tagged with the built-in offline mediums — print, offline, event — land in Unassigned unless the property has a custom channel group for them, and then the spend looks like it produced nothing.

Add an “Offline & QR” channel group that matches those mediums, and every scan shows up under its own channel, next to paid and organic.

Where GA4 files every built-in medium

The honest part

What we deliberately don’t do

  • No branded short domains. Codes live on app.tagdocket.com. A custom domain is not built, so it is not for sale.
  • No permanent redirects. Codes answer with a 302, never a 301, so a phone that scanned before a retarget still follows the new destination.
  • No deleted codes. Something printed is out there for good, so a code is disabled instead.

Questions

Questions about print

How big should the QR code be on a yard sign?
For a code read from 9.8 ft (3 m) away, at least 11.8 in (30 cm) wide. At that size the full tagged link needs a 65×65 grid of 4.62 mm squares, and a short link a 29×29 grid of 10.34 mm squares, which is why printed pieces get a short code.
What if a printed QR code needs to point somewhere new?
Printed pieces get a short code, and a short code can be repointed after the print run. Retargeting moves the destination and leaves the tagging alone, so GA4 keeps seeing the same campaign.
What about radio and TV, where there is nothing to scan?
Log them as placements anyway, with a promo code, a tracking number and the leads counted by hand, so their cost per lead sits next to the printed pieces.
Do printed codes stop working if a client leaves or we stop paying?
No. Retiring a client archives it and its codes keep resolving. An agency whose plan ends moves to the free plan, and its printed codes keep working. When a client moves to another agency, control of its short codes moves with it.

Size the next mail drop before it goes to the printer.

Start a free trial, no card needed. Your team signs in with an email link, no passwords.